Camshaft Removal

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Remove the camshaft retainer bolts (204) and retainer (203).
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.

Remove the camshaft.
1. Install the camshaft sprocket bolt or solenoid valve into the camshaft front bolt hole.
2. Using the bolt or solenoid valve as a handle, carefully rotate and pull the camshaft out of the engine block.
3. Remove the bolt or solenoid valve from the front of the camshaft.