LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Mechanical - 6.0L (L96 LC8)) >> Diagnostic Information and Procedures >> Engine Noise Under Load

Engine Noise Under Load

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Cause Correction
Low oil pressure
  1. Perform an oil pressure test. Refer to Oil Pressure Diagnosis and Testing .
  2. Repair or replace, as required.
Detonation or spark knock Verify the correct operation of the ignition controls. Refer to Symptoms - Engine Controls .
Loose torque converter bolts
  1. Inspect the torque converter bolts and flex plate.
  2. Repair, as required.
Cracked flex plate - automatic transmission
  1. Inspect the flex plate bolts and flex plate.
  2. Repair, as required.
Excessive connecting rod bearing clearance Inspect the following components and repair, as required:
  • The connecting rod bearings
  • The connecting rods
  • The crankshaft
Excessive crankshaft bearing clearance Inspect the following components and repair, as required:
  • The crankshaft bearings
  • The crankshaft journals
  • The cylinder block crankshaft bearing bore
scientia non olet · About LEMON Manuals