Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Support the front and rear propeller shaft with a suitable jack.
Front Propeller Shaft Bearing Nut (1)@ Propeller Shaft Center Support Bearing (2) - Remove[2x]
Using the jack, lower the front and rear propeller shaft (1) enough to provide clearance.
- Propeller Shaft Center Support Bearing Shield (2) - Remove
Propeller Shaft Hanger Bolt (1) - Remove[2x]
- Propeller Shaft Hanger (2) - Remove