Fastener Specifications (On Vehicle)
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Auxiliary Fluid Cooler Bolts | 12 N.m (106 lb in) |
| Floor Shift Control Indicator Screw | 2.5 N.m (22 lb in) |
| Floor Shift Control Lever Bolt | 9 N.m (80 lb in) |
| Floor Shift Control Lever Knob Screw | 6 N.m (53 lb in) |
| Fluid Filler Tube Nut | 18 N.m (13 lb ft) |
| Fuel Pipe Bracket Screw | 9 N.m (80 lb in) |
| Heat Shield to Transmission Bolts | 17 N.m (13 lb ft) |
| Range Selector Lever to Transmission | 25 N.m (18 lb ft) |
| Range Selector Lever Cable Bracket Bolts | 22 N.m (16 lb ft) |
| Torque Converter Cover Bolts | 12 N.m (106 lb in) |
| Torque Converter to Flex Plate Bolts | 65 N.m (48 lb ft) |
| Transmission to Engine Bolts | 50 N.m (37 lb ft) |
| Transmission Electrical Harness Retaining Screw | 9 N.m (80 lb in) |
| Transmission Fluid Cooler Pipe Bracket Bolt | 22 N.m (16 lb ft) |
| Transmission Mount to Crossmember Nuts | 55 N.m (41 lb ft) |
| Transmission Mount to Transmission Bolts | 50 N.m (37 lb ft) |