LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Exhaust System) >> Repair Instructions >> Catalytic Converter Replacement (L96, LC8) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Electrical Connector @ Heated Oxygen Sensor Bank 1 Sensor 1 - Disconnect - Heated Oxygen Sensor Replacement - Bank 1 Sensor 1
  3. Electrical Connector @ Heated Oxygen Sensor Bank 1 Sensor 2 - Disconnect - Heated Oxygen Sensor Replacement - Bank 1 Sensor 2
  4. Electrical Connector @ Heated Oxygen Sensor Bank 2 sensor 1 - Disconnect - Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
  5. Electrical Connector @ Heated Oxygen Sensor Bank 2 sensor 2 - Disconnect - Heated Oxygen Sensor Replacement - Bank 2 Sensor 2
  6. GM4846478Courtesy of GENERAL MOTORS COMPANY

    Exhaust Front Pipe Nut (1) @ Left Side - Remove [3x]

  7. GM4846326Courtesy of GENERAL MOTORS COMPANY

    Exhaust Front Pipe Nut (1) @ Right Side - Remove [3x]

  8. GM4852924Courtesy of GENERAL MOTORS COMPANY

    Catalytic Converter Nut (1) - Remove [2x]

  9. GM4852927Courtesy of GENERAL MOTORS COMPANY

    Catalytic Converter (1) - Remove

  10. Catalytic Converter Gasket (2) - Remove and DISCARD
  11. Transfer components as necessary.
scientia non olet · About LEMON Manuals