Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Electrical Connector(1)@ Frame Rail - Disconnect[2x]
- Wiring Harness Clip(2)@ Frame Rail - Unclip[4x]
- Wiring Harness Clip(3)@Rear Axle Bracket - Unclip
- Clean the area surrounding the wheel speed sensor of any accumulated dirt and debris.
Rear Wheel Speed Sensor Bolt(1) - Remove[4x]
- Rear Wheel Speed Sensor(2) - Remove[2x]