LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Antilock Brake System) >> Repair Instructions >> Rear Wheel Speed Sensor Replacement (JH6) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM4891252Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The wheel and tire assembly is shown removed for clarity.

    Electrical Connector(1)@ Frame Rail - Disconnect

  3. Wiring Harness Clip(2)@ Frame Rail - Unclip[2x]
  4. Clean the area surrounding the wheel speed sensor of any accumulated dirt and debris.
  5. GM4891338Courtesy of GENERAL MOTORS COMPANY

    Wiring Harness Clip(1)@Rear Axle - Unclip

  6. Rear Wheel Speed Sensor Bolt(2) - Remove
  7. Rear Wheel Speed Sensor(3) - Remove