Component Testing
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X1 harness connector at the S48A Multifunction Switch - Instrument Panel.
- Test for infinite resistance between the signal terminal 17 and the ground terminal 14 with the switch in the open position.
- If less than infinite resistance
Replace the S48A Multifunction Switch - Instrument Panel.
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 2 Ω between the signal terminal 17 and the ground terminal 14 with the switch in the closed position.
- If 2 Ω or greater
Replace the S48A Multifunction Switch - Instrument Panel.
- Go to next step: If less than 2 Ω
- If 2 Ω or greater
- All OK.