Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to Brake Dust Warning .

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.

NOTE:
Do NOT disconnect the hydraulic brake flexible hose from the caliper.

Remove the rear brake caliper and bracket assembly (1) and support with heavy mechanics wire or equivalent. Rear Brake Caliper Replacement (JH6) , or Rear Brake Caliper Replacement (JH9)
Courtesy of GENERAL MOTORS COMPANY

Rear Disc Brake Outer Pad(2) - Remove
Rear Disc Brake Inner Pad(1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Disc Brake Pad Retainer Spring(1) - Remove[4x]
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Caliper Bracket(1)@Rear Brake Caliper - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Caliper Guide Pin- Upper(1) - Remove

NOTE:

The lower Rear Brake Caliper Guide Pin is equipped with a bushing.

Rear Brake Caliper Guide Pin- Lower(2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Brake Caliper Guide Pin Boot(1) - Inspect for damage - Rear Disc Brake Mounting and Hardware Inspection (With Single Rear Wheel) , or Rear Disc Brake Mounting and Hardware Inspection (With Dual Rear Wheel)
Rear Brake Caliper Guide Pin Seal(2) - Inspect for damage - Rear Disc Brake Mounting and Hardware Inspection (With Single Rear Wheel) , or Rear Disc Brake Mounting and Hardware Inspection (With Dual Rear Wheel)