Fastener Specifications
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Linkage Idler Arm Nut | 63 N.m (46 lb ft) |
| Steering Linkage Inner Tie Rod Retaining Nut | 112 N.m (83 lb ft) |
| Steering Linkage Pitman Arm Nut | 63 N.m (46 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Pitman Arm Nut | 250 N.m (185 lb ft) |
| Steering Linkage Idler Arm Bolt | 150 N.m (111 lb ft) |
| Steering Linkage Outer Tie Rod Nut | |
|
35 N.m (26 lb ft) |
|
60 - 75 degrees |