Pitman Arm Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Steering Gear Replacement (Without LWN) , or Steering Gear Replacement (With LWN)
1	Pitman Arm Nut CAUTION: Refer to Fastener Caution . Tighten 250 N.m (185 lb ft)
2	Pitman Arm Washer
3	Pitman Arm Procedure Place match marks on the pitman arm and the steering gear to aid in installation. Use the CH-29107 - A puller or the J-6632 - 01 remover to separate the pitman arm from the steering gear. Special Tools CH-29107 - A Pitman Arm Puller J-6632 - 01 Pitman Arm Remover Equivalent regional tools:Special Tools