LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Steering Wheel And Column) >> Repair Instructions >> Steering Column Tilt Spring Replacement

Steering Column Tilt Spring Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM1967831Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the steering column trim covers. Steering Column Trim Cover Replacement 
1 Steering Column Tilt Spring
WARNING:

The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers during removal. Secure the spring with locking pliers during installation. Bodily injury may result during removal and installation of the tilt spring and the spring guide. Always use caution during removal and installation of the tilt spring and the spring guide.

Procedure

  1. Pry up the steering column tilt spring until a bulge occurs and most of the tension is removed.
  2. Secure the steering column tilt spring with locking pliers.
  3. Continue prying until the steering column tilt spring disengages from the posts on the steering column and the steering column tilt head.
  4. If necessary, transfer the steering column tilt guide.
scientia non olet · About LEMON Manuals