LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Underhood Electrical Center or Junction Block Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (Single Battery) , or Battery Negative Cable Disconnection and Connection (Dual Battery) .
  2. GM4853644Courtesy of GENERAL MOTORS COMPANY

    Fuse Block Cover(1) - Remove

  3. GM4853648Courtesy of GENERAL MOTORS COMPANY

    Forward Lamp Wiring Harness Connector (1) - Remove

  4. Remove the fuse block wiring harness terminal nut. (2)[2x]
  5. Remove the instrument panel wiring harness terminal. (3)
  6. Remove the wiring harness terminal. (4)
  7. GM4853651Courtesy of GENERAL MOTORS COMPANY

    Junction Block Bolt (1) - Loosen[3x]

  8. Junction Block (2) - Remove
scientia non olet · About LEMON Manuals