Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Install body wiring harness junction block (2) to the base.
- Body Wiring Harness Terminal Bolt (1) - Tighten[2x]3.5N.m (31 lb in)
Install the wiring harness.(1)
Connect all electrical connectors.(1)
Instrument Panel Wiring Harness Terminal (2) - Install
- Instrument Panel Wiring Harness Junction Block Nut (1) - Install and tighten10N.m (89 lb in)
Fuse Block Cover(1) - Install
- Starter Solenoid Cable Nut(1) - Install and tighten 12 N.m (106 lb in).
Install the Left Hand Seat. Front Seat Removal and Installation
- Battery Negative Cable - Install - Battery Negative Cable Disconnection and Connection (Single Battery) , or Battery Negative Cable Disconnection and Connection (Dual Battery)
CAUTION:
Refer to Fastener Caution .