LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Vibration Diagnosis And Correction) >> Description and Operation >> Vibration Theory and Terminology >> Resonance

Vibration Theory and Terminology: Resonance

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
GM95596Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Frequency - cps
2 Suspension Frequency
3 Unbalanced Excitation
4 Point of Resonance
5 Problem Speed

All objects have natural frequencies. The natural frequency of a typical automotive front suspension is in the 10 - 15 Hz range. This natural frequency is the result of the suspension design. The suspension's natural frequency is the same at all vehicle speeds. As the tire speed increases along with the vehicle speed, the disturbance created by the tire increases in frequency. Eventually, the frequency of the unbalanced tire will intersect with the natural frequency of the suspension. This causes the suspension to vibrate. The intersecting point is called the resonance.

The amplitude of a vibration will be greatest at the point of resonance. While the vibration may be felt above and below the problem speed, the vibration may be felt the most at the point of resonance.