Oscilloscope Balancing Display
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
The propeller shaft balancing will consist of an initial run, three calibration runs, and a verification run. The software will walk through what is required for each run.
 Courtesy of GENERAL MOTORS COMPANY
|
An example of the pinion flange balancing screen is shown above.
 Courtesy of GENERAL MOTORS COMPANY
|
An example of the hose clamp balancing screen is shown above.