Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
Front Brake Hose (3)@Steering Knuckle - Remove - Front Brake Hose Replacement
Steering Linkage Outer Tie Rod (3)@Steering Knuckle - Separate - Steering Linkage Outer Tie Rod Replacement
Front Brake Rotor (1) - Remove - Front Brake Rotor Replacement (JH6) , or Front Brake Rotor Replacement (JH9)
Front Wheel Speed Sensor (1)@Steering Knuckle - Remove - Front Wheel Speed Sensor Replacement
Front Wheel Hub (1) - Remove - Front Wheel Hub, Bearing, and Seal Replacement
- Support the front lower control arm with a jack stand.
Front Lower Control Arm Ball Stud (2)@Steering Knuckle - Separate - Lower Control Arm Replacement
Front Upper Control Arm Ball Stud (2)@Steering Knuckle - Separate - Upper Control Arm Replacement
Steering Knuckle (1) - Remove