Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Front Stabilizer Shaft Insulator Clamp Nut (1) - Remove [2x]
- Front Stabilizer Shaft Insulator Clamp Bolt (2) - Remove [2x]
- If the front stabilizer shaft insulator clamp studs (3) were removed with the front stabilizer shaft insulator clamp nuts (1), separate the nuts from the studs.
Front Stabilizer Shaft Insulator Clamp (1) - Remove [2x]
- Front Stabilizer Shaft Insulator (2) - Remove [2x]
NOTE:
The front stabilizer shaft insulator clamp stud MAY come out of the vehicle frame when removing the front stabilizer shaft insulator clamp nuts.