LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Front Suspension) >> Repair Instructions >> Shock Absorber Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
  3. GM4528759Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Splash Shield (3) - Remove - Wheelhouse Splash Shield Replacement (Left Side) , or Wheelhouse Splash Shield Replacement (Right Side)

  4. Support the front lower control arm with a suitable jack stand.
  5. GM4914746Courtesy of GENERAL MOTORS COMPANY

    Front Shock Absorber Nut (1)@Front Shock Absorber (3) - Remove

  6. Front Shock Absorber Upper Insulator (2)@Front Shock Absorber (3) - Remove
  7. GM4914914Courtesy of GENERAL MOTORS COMPANY

    Front Shock Absorber Bolt (1) - Remove [2x]

  8. Front Shock Absorber (2) - Remove
  9. Front Shock Absorber Lower Insulator (3)@Front Shock Absorber (2) - Remove