LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Front Suspension) >> Repair Instructions >> Front Upper Control Arm Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
  3. GM4920683Courtesy of GENERAL MOTORS COMPANY

    Front Upper Control Arm (1) - Remove - Upper Control Arm Replacement 

  4. Place the front upper control arm securely in a soft jawed vice.
  5. GM4920757Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use the appropriate tools to remove the front upper control arm bushings.

    Front Upper Control Arm Bushing (1)@Front Upper Control Arm - Remove [2x]

scientia non olet · About LEMON Manuals