LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Automatic Transmission - 6L90 (MYD) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4842586Courtesy of GENERAL MOTORS COMPANY

    Position the transmission range selector cable bracket (2) to the transmission.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission range selector cable bracket bolts (1) and tighten to 22 N.m (16 lb ft).
  3. Install the cable to the bracket. Range Selector Lever Cable Replacement 
  4. Lower the vehicle. Lifting and Jacking the Vehicle
  5. Check the vehicle for proper operation. If cable adjustment is necessary, refer to Range Selector Lever Cable Adjustment .
scientia non olet · About LEMON Manuals