Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Electrical Connector (1) @ Nitrogen Oxides Sensor (3) - Disconnect
- Nitrogen Oxides Sensor Bolt (2) - Remove [2x]
Nitrogen Oxides Sensor Cable (1) @ Nitrogen Oxides Sensor Cable Clip (2) - Unclip [2x]
- Remove the supports and lower the vehicle.
- Engine Cover - Remove - Engine Cover Replacement
Nitrogen Oxides Sensor (1) - Remove