LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions) >> Repair Instructions >> NOx Absorber Catalyst Reset >> With Scan Tool

With Scan Tool

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Select: Module Diagnostics
  3. Select: Engine Control Module
  4. Select: Configuration/Reset Functions
  5. Select: Reset Functions
  6. Select: NOx Absorber Catalyst Reset
    7. NOTE:

    The scan tool does not display the learn/reset status.

  7. Follow the instructions on the scan tool. - The procedure will complete within 10 s
  8. All OK.
scientia non olet · About LEMON Manuals