LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions) >> Repair Instructions >> Fuel Injection Pump Drive Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3416449Courtesy of GENERAL MOTORS COMPANY

    Install the fuel injection pump drive pulley (2) and fuel injection pump driven sprocket nut (1) by hand.

  2. GM3229217Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Hold the fuel injection pump drive pulley (1) with the EN-51104  holder (1) and tighten the fuel injection pump driven sprocket nut to 88 N.m (65 lb ft).

  3. Install the timing belt. Timing Belt Replacement