LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions) >> Repair Instructions >> Fuel Feed Hydrocarbon Injection Front Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Diesel/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM4605867Courtesy of GENERAL MOTORS COMPANY

    Fuel Feed Hydrocarbon Injection Front Pipe (1) - Disconnect - Plastic Collar Quick Connect Fitting Service 

  3. Fuel Feed Hydrocarbon Injection Front Pipe (1) @ Retainer (2) - Remove [4x]
  4. GM4605869Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Remove black plastic cap from top of injector before installing CH-49736  Hydrocarbon Injector Quick Connect Release Tool.

    Fuel Feed Hydrocarbon Injection Front Pipe (1) - Disconnect - CH-49736  Hydrocarbon Injector Quick Connect Release Tool

  5. Fuel Feed Hydrocarbon Injection Front Pipe (1) @ Retainer (2) - Remove [2x]