Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Radiator Inlet Hose (2) - Remove - Radiator Inlet Hose Replacement (LWN) .
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Pipe (1) - Remove - Exhaust Gas Recirculation Pipe Replacement
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Cooler Temperature Sensor-Position 2 (1) - Remove - Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Valve Electrical Connector (1) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Cooler Hose Clamp (1) - Disengage [2x] - Hose Clamp Replacement Guidelines - Spring Type
Exhaust Gas Recirculation Valve Vacuum Pipe (2) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Cooler Bolt (1) - Remove
Fuel Injection Fuel Rail Stop Bolt (2) - Remove
Oil Level Indicator and Tube - Remove and reposition away - Oil Level Indicator Tube Replacement
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Valve Brace Bracket Bolt (1) - Remove
Exhaust Gas Recirculation Valve Nut (2) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Valve (1) - Remove
Exhaust Gas Recirculation Valve Gasket (2) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

Exhaust Gas Recirculation Cooler (4) - Remove - Exhaust Gas Recirculation Cooler Replacement