LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions) >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine Cover - Remove - Engine Cover Replacement
  2. GM4627753Courtesy of GENERAL MOTORS COMPANY

    Exhaust Gas Recirculation Cooler Temperature Sensor Electrical Connector (1) - Disconnect

  3. Exhaust Gas Recirculation Cooler Temperature Sensor Wiring Harness Retainer (2) - Disengage
  4. GM4627762Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Apply penetrating oil to the sensor and allow to soak for 10 minutes prior to removal.

    Exhaust Gas Recirculation Cooler Temperature Sensor (1) - Remove

scientia non olet · About LEMON Manuals