Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Engine Wiring Harness (1) @ Electrical Connector (2) - Disconnect
- Electrical Connector (2) @ Crankshaft Position Sensor Bracket (3) - Unclip [2x]
Crankshaft Position Sensor Bracket Bolt (1) - Remove [2x]
- Crankshaft Position Sensor Bracket (2) - Remove
- CAUTION:
Do not allow the crankshaft position sensor reluctor ring to come into contact with external magnetic fields or sharp metal objects. Do not drop the crankshaft position sensor reluctor ring. Do not damage the rubberized encoder track. Failure to follow these precautions may cause damage to the component.
Crankshaft Position Sensor Bolt (1) - Remove
- Crankshaft Position Sensor (2) - Remove