LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Steering System) >> Repair Instructions >> Power Brake Booster Inlet Hose Replacement (Without LWN) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Power Steering Fluid Reservoir Outlet Hose - Remove - Power Steering Fluid Reservoir Outlet Hose Replacement (With LWN) , or Power Steering Fluid Reservoir Outlet Hose Replacement (Without LWN) 
  3. GM4626446Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Inlet Hose(1) @ Power Steering Pump - Remove

  4. Remove the power brake booster inlet hose seal (2).

    DISCARD the seal.

  5. GM4626442Courtesy of GENERAL MOTORS COMPANY

    Remove the power brake booster outlet hose strap (1).

    DISCARD the strap.

  6. Power Brake Booster Inlet Hose(2) @ Power Brake Booster - Remove
  7. Remove the power brake booster inlet hose seal (3).

    DISCARD the seal.

  8. GM4626451Courtesy of GENERAL MOTORS COMPANY

    Remove the power brake booster inlet hose (1) from the vehicle through the top of the engine compartment.