Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Remove the caps from the fittings and plugs from the holes before installing the transmission fluid cooler pipes.
Install the transmission fluid auxiliary cooler pipe (1) into the vehicle.
- Transmission Fluid Auxiliary Cooler Inlet Pipe (1) @ Radiator (2) - Engage - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- NOTE:
Remove the caps from the fittings and plugs from the holes before installing the transmission fluid cooler pipes.
Transmission Fluid Auxiliary Cooler Inlet Pipe (1) @ Transmission Fluid Auxiliary Cooler - Engage - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
- Front Grille - Install - Front Grille Replacement (Chevrolet)Front Grille Replacement (GMC)
- Check the transmission fluid level. Transmission Fluid Level and Condition Check
- Inspect for transmission fluid leaks.
- Remove the drain pan.