Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
P0716
- DTC P0101, P0102, P0103, P0121, P0122, P0716, P07BF, or P07C0 = Not set
- Accelerator Pedal Position Signal from Engine Control Module = Greater than 5%
- Battery Voltage = Greater than 9 V
- Engine Torque = Greater than 30 Nm (22 lb ft)
- Transmission ISS = Greater than 170 RPM
- Transmission OSS = Greater than 214 RPM
Frequency the DTC runs = Continuously - After the running conditions are met
P0717
- DTC P0101, P0102, P0103, P0716, P0722, P0723, P077C, P0770, P07BF or P07C0 = Not set
- Accelerator Pedal Position Signal from Engine Control Module = Greater than 5%
- Battery Voltage = Greater than 9 V
- Engine Torque = Greater than 30 Nm (22 lb ft)
- Transmission OSS = Greater than 68 RPM - Gear 1, 2, 3, 4, 5
- Transmission OSS = Greater than 214 RPM - Gear 6, 7, 8
Frequency the DTC runs = Continuously - After the running conditions are met
P07BF, P07C0
- { P07BF }DTC P07C0 = Not pending
- { P07C0 }DTC P07BF = Not pending
- Battery Voltage = 11 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met