Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
P0716
- DTC P0101 - P0103, P0121 - P0123, P0717, P0752, P0973, P0974 = Not set
- Accelerator Pedal Position Signal from Engine Control Module = Valid
- Engine Speed = 400 to 7, 500 RPM
- Engine Torque = Valid
- Ignition Voltage = 9 to 32 V
- Vehicle Speed = Greater than 10 km/h (6 MPH)
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P0717
- DTC P0101 - P0103, P0717, P0722, P0723 = Not set
- Engine Torque = 50 to 8200 Nm (37 to 6048 lb ft)
- Engine Speed = 400 to 7, 500 RPM
- Ignition Voltage = 9 to 32 V
- Vehicle Speed = Greater than 16 km/h (10 MPH)
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s