Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
P0711
- DTC P0101 - P0103, P0106 - P0108, P0171, P0172, P0174, 0175, P0201 - P0208, P0300 - P0308, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, PO712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, P2730 = Not set
- Accelerator pedal position signal = Valid
- Engine Speed = 400 to 7, 500 RPM
- Engine Torque Signal = Valid
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P0712, P0713
- DTC P0716, P0717, P0722, P0723 = Not set
- Ignition Voltage = 9 to 32 V
- Engine Speed = 400 to 7, 500 RPM
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s