Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
When instrument panel extension is being replaced with a new one, cut the bosses on the new instrument panel extension in order to install the mounting bolts.

Install the instrument panel outer air outlet duct (1) to the instrument panel extension (2).

CAUTION:

Refer to Fastener Caution .

Install the appropriate instrument panel outer air outlet duct bolts (2x) and tighten to 2.0 N.m (18 lb in)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Extension (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Upper Trim Panel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Cluster Trim Plate (1) - Install - Instrument Panel Cluster Trim Plate Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster- Left Side (1) - Install - Instrument Panel Knee Bolster Replacement (Left Side)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster-Right Side (1) - Install - Instrument Panel Knee Bolster Replacement (Right Side)
Courtesy of GENERAL MOTORS COMPANY

Windshield Garnish Molding (3) - Install - Windshield Garnish Molding Replacement