Installation Procedure
Heater Water Auxiliary Pump Inlet Hose (2) @ Water Pump Inlet Pipe - Install - Heater Water Auxiliary Pump Inlet Hose Replacement (LWN without K08 Heater Inlet and Outlet Pipe to Lower Water Pump Inlet Pipe) , or Heater Water Auxiliary Pump Inlet Hose Replacement (LWN without K08 Heater Inlet and Outlet Pipe to Upper Water Pump Inlet Pipe)
- Heater Water Auxiliary Pump Inlet Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
Heater Water Auxiliary Pump Inlet Hose (3) @ Heater Inlet and Outlet Pipe - Install - Heater Water Auxiliary Pump Inlet Hose Replacement (LWN without K08 Heater Inlet and Outlet Pipe to Lower Water Pump Inlet Pipe) , or Heater Water Auxiliary Pump Inlet Hose Replacement (LWN without K08 Heater Inlet and Outlet Pipe to Upper Water Pump Inlet Pipe)
- Heater Water Auxiliary Pump Inlet Hose Clamp (2) - Engage - Hose Clamp Replacement Guidelines - Spring Type
- Wiring Harness Clip (1) @ Heater Water Auxiliary Pump Inlet Hose - Install
Front Wheelhouse Splash Shield- Left Side (3) - Install - Wheelhouse Splash Shield Replacement (Left Side)
- Fill the cooling system to the proper level. Cooling System Draining and Filling (Static Fill LWN) , or Cooling System Draining and Filling (GE 47716 LWN) , or Cooling System Draining and Filling (Static LC8, LV1, L96) , or Cooling System Draining and Filling (GE47716 LC8, LV1, L96)
- Start the engine and check for coolant leaks.