Installation Procedure
Heater Coolant Heater (1) @ Heater Coolant Heater Bracket - Install
- CAUTION:
Refer to Fastener Caution .
Heater Coolant Heater Bolt (1) - Install and tighten 8 N.m (71 lb in)
- Electrical Connector @ Heater Coolant Heater - Connect
Fuel Heater Pipe (1) @ Heater Coolant Heater - Install - Fuel Heater Pipe Replacement
Heater Coolant Heater Exhaust Muffler (1) @ Heater Coolant Heater - Install - Heater Coolant Heater Exhaust Muffler Replacement (LWN)
Fuel Heater Inlet Hose (2) @ Heater Coolant Heater - Install - Fuel Heater Inlet Hose Replacement (LWN)
Fuel Heater Outlet Hose (3) @ Heater Coolant Heater - Install - Fuel Heater Outlet Hose Replacement (LWN)
Auxiliary Heater Inlet and Outlet Pipe (2) @ Heater Coolant Heater - Install - Auxiliary Heater Inlet and Outlet Pipe Replacement (LWN) , or Auxiliary Heater Inlet and Outlet Pipe Replacement (L96, LV1 with C36)
- Fill the cooling system. Cooling System Draining and Filling (Static Fill LWN) , or Cooling System Draining and Filling (GE 47716 LWN) , or Cooling System Draining and Filling (Static LC8, LV1, L96) , or Cooling System Draining and Filling (GE47716 LC8, LV1, L96)
- Start the engine and check for coolant leaks.