Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Heater Inlet and Outlet Hose (1) @ Auxiliary Heater Inlet and Outlet Hose- Rear (2) - Install - Auxiliary Heater Inlet and Outlet Hose Replacement (Intermediate & C36) , or Auxiliary Heater Inlet and Outlet Hose Replacement (Rear & C36)
Auxiliary Heater Inlet and Outlet Hose (2) @ Auxiliary Heater Inlet and Outlet Pipe - Install
- Hose Clamp (1) - Engage [2x] - Hose Clamp Replacement Guidelines - Spring Type
- CAUTION:
Auxiliary Heater Inlet and Outlet Hose Clip Bolt (1) @ Auxiliary Heater Inlet and Outlet Hose (2) - Install and tighten 9 N.m (80 lb in)
Auxiliary Heater Inlet and Outlet Hose Clip Nut (1) @ Auxiliary Heater Inlet and Outlet Hose (2) - Install and tighten 9 N.m (80 lb in)
Install seven visible rivets (1) and secure the catalytic converter heat shield (2). Exhaust Heat Shield Replacement - Body Panel
- Fill the cooling system to the proper level. Cooling System Draining and Filling (Static Fill LWN) , or Cooling System Draining and Filling (GE 47716 LWN) , or Cooling System Draining and Filling (Static LC8, LV1, L96) , or Cooling System Draining and Filling (GE47716 LC8, LV1, L96)
- Start the engine and check for coolant leaks.