LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Diagnostic Information And Procedures (2 Of 3)) >> Diagnostic Information and Procedures >> DTC P10D5 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

The charge air cooler (CAC) temperature sensor 2 is a variable resistor. The sensor is located in the CAC outlet duct after the CAC assembly. Its signal is used by the ECM to measure the temperature of the intake air exiting the CAC. The engine control module (ECM) supplies 5 V to the signal circuit and a ground for the low reference circuit. The ECM monitor s the sensor signal for a start-up signal that is not in c or relation with the intake air temperature (IAT) sensor 3 start-up signal and fuel temperature sensor signal.

scientia non olet · About LEMON Manuals