Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Install a NEW camshaft position actuator magnet gasket (2).
- Position the camshaft position actuator magnet (1).
- CAUTION:
Refer to Fastener Caution .
Install the camshaft position actuator magnet bolts (2) and tighten to 10 N.m (89 lb in).
- Connect the electrical connector (1).
- Water Pump - Install - Water Pump Replacement (LV1) .
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Single Battery) , or Battery Negative Cable Disconnection and Connection (Dual Battery)