LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Rear Drive Axle) >> Repair Instructions >> Rear Axle Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive pinion. Drive Pinion and Ring Gear Replacement (10.5 Inch Axle) , or Drive Pinion and Ring Gear Replacement (9.5 Inch Axle) 
  2. Install the differential case. Drive Pinion and Ring Gear Replacement (10.5 Inch Axle) , or Drive Pinion and Ring Gear Replacement (9.5 Inch Axle) 
  3. Adjust the side bearing preload. Differential Carrier Bearing Preload Adjustment (9.5 Inch Axle) , or Differential Carrier Bearing Preload Adjustment (10.5 Inch Axle) 
  4. Adjust the backlash. Backlash Adjustment (9.5 Inch Axle) , or Backlash Adjustment (10.5 Inch Axle) .
  5. Perform a gear tooth contact pattern check. Gear Tooth Contact Pattern Inspection 
  6. Install the rear parking brake anchor backing plate. Rear Parking Brake Anchor Backing Plate Replacement (JH9) , or Rear Parking Brake Anchor Backing Plate Replacement (JH6)
  7. Install the rear axle. Rear Axle Replacement (9.5 Inch Axle) , or Rear Axle Replacement (10.5 Inch Axle) 
  8. Fill the axle with lubricant. Differential Oil Replacement (10.5 Inch Axle) , or Differential Oil Replacement (9.5 Inch Axle) 
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals