Locking Differential Cam Unit Disassemble (9.5 Inch Axle)
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
- J-22912-01 Split Plate Bearing Puller
- J-45232 Adjuster Bearing Replacer (Left Side)
Equivalent regional tools:Special Tools
- Measure and record the overall length of the locking differential side gear assembly from the front of the locking differential side locking differential side gear to thrust washer.
- Remove the guide clips.
Using the J-22912-01 puller (2), J-45232 replacer (1) and a hydraulic press, remove the locking differential side gear thrust sleeve.
Remove the locking differential clutch disc thrust washer (6).
- Remove the locking differential side gear thrust sleeve (5).
- Remove the locking differential clutch disc set (1).
- Remove the locking differential clutch disc guide.
- Disassemble the locking differential clutch disc assembly (1).
NOTE:
The locking differential clutch disc guide is NOT serviced separately. It is serviced with the locking differential clutch disc assembly.