Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Rear Parking Brake Anchor Backing Plate (1) - Install
- CAUTION:
Refer to Fastener Caution .
Parking Brake Support Nut- Front (1) - Install and tighten [2x]185 N.m (137 lb ft) [2x]
Parking Brake Support Nut- Rear (1) - Install and tighten [2x]185 N.m (137 lb ft)
Parking Brake Shoe (1) - Install [2x] - Parking Brake Shoe Replacement (JH6) , or Parking Brake Shoe Replacement (JH9)
- Rear Axle Shaft - Install - Rear Axle Shaft Replacement
Rear Brake Rotor (1) - Install - Rear Brake Rotor Replacement (JH6) , or Rear Brake Rotor Replacement (JH9)
Parking Brake Rear Cable (2) @ Rear Parking Brake Actuator Lever (1) - Install - Parking Brake Rear Cable Replacement - Left Side , OR Parking Brake Rear Cable Replacement - Right Side
- Parking Brake Rear Cable (2) @ Rear Parking Brake Anchor Backing Plate (4) - Install
- Parking Brake Shoe - Adjust Parking Brake Adjustment
- Install the rear tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels) , or Tire and Wheel Removal and Installation (With Dual Rear Wheels)
- Remove the support and lower the vehicle.
- Enable the parking brake cable automatic adjuster. Parking Brake Cable Adjuster Enabling