LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Controls And Fuel - 6.0L (L96 LC8) - Repair Instructions) >> Repair Instructions >> Fuel Injector Replacement (L96) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Diesel/Gasoline Vapors Warning .

WARNING:

Refer to Safety Glasses Warning .

CAUTION:

Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.

  1. Fuel Injection Fuel Rail - Remove - Fuel Injection Fuel Rail Assembly Replacement (L96) 
  2. GM4859618Courtesy of GENERAL MOTORS COMPANY

    Remove the fuel injector retainer (1).

  3. Remove the fuel injector (2) from the fuel injection fuel rail.
  4. Remove and DISCARD the upper fuel injector seal (3).
  5. Remove and DISCARD the lower fuel injector seal (4).