LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Controls And Fuel - 6.0L (L96 LC8) - Repair Instructions) >> Repair Instructions >> Fuel Feed and Evaporative Emission Front Pipe Replacement (Passenger/Cargo) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4854901Courtesy of GENERAL MOTORS COMPANY

    Fuel Feed and Evaporative Emission Front Pipe (4)Install

  2. Fuel Feed Pipe(3) - Connect - Metal Collar Quick Connect Fitting Service 
  3. Evaporative Emission Pipe(2) - Connect - Plastic Collar Quick Connect Fitting Service 
    4. CAUTION:

    Refer to Fastener Caution .

  4. Fuel Feed and Evaporative Emission Front Pipe Nut (1) - Install and tighten25N.m (18 lb ft)
  5. Raise and support the vehicle. Lifting and Jacking the Vehicle .
  6. GM4854900Courtesy of GENERAL MOTORS COMPANY

    Retainer(1) - Install[2x]

  7. GM4852621Courtesy of GENERAL MOTORS COMPANY

    Retainer(2) - Install

  8. Connect electrical connector.
  9. Fuel Feed and Evaporative Emission Front Pipe Bolt (1) - Install and tighten10N.m (89 lb in)
  10. GM5206453Courtesy of GENERAL MOTORS COMPANY

    Evaporative Emission Pipe(2) - Connect - Plastic Collar Quick Connect Fitting Service 

  11. Fuel Feed Pipe(1) - Connect - Metal Collar Quick Connect Fitting Service 
  12. Lower the vehicle.
  13. Engine Cover - Install - Engine Cover Replacement
scientia non olet · About LEMON Manuals