Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Crankshaft Balancer - Remove - Crankshaft Balancer Replacement
Disconnect the electrical connector (1).
Remove the engine front cover bolts (1).
- Disconnect the electrical connector (2) from the camshaft position actuator magnet.
- Reposition the camshaft position sensor wire bracket (3) and disconnect the electrical connector (4) from the camshaft position sensor.
- Remove the camshaft position sensor wire bracket (3) from the vehicle.
Remove the camshaft position sensor (1) from the engine front cover.