Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Engine Cover - Remove - Engine Cover Replacement
- Battery Negative Cable - Disconnect - Battery Negative Cable Disconnection and Connection (Single Battery) , or Battery Negative Cable Disconnection and Connection (Dual Battery)
- Front Wheelhouse Splash Shield-Left Side - Remove - Wheelhouse Splash Shield Replacement (Left Side) , or Wheelhouse Splash Shield Replacement (Right Side)
- NOTE:
Engine front crossmember removed for clarity.
Oil Pan Deadener Bolt(1) - Remove[5x]
- Oil Pan Deadener(2) - Remove
- Support the engine/transmission assembly with a suitable jack.
Engine Mount Fastener(1) - Remove[3x]
Engine Mount Bracket Fastener(1) - Remove and DISCARD[2x]
- Raise the engine with a suitable lifting device to remove the engine mount.
- Engine Mount(2) - Remove
NOTE:
In order to avoid oil pan damage and possible engine failure, insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support.