Transmission Case Front Cover and Drive Link Removal
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Case Front Cover Bolt M6 x 30 [11x]
NOTE:
DISCARD the bolts. |
| 2 | Automatic Transmission Case Front Cover Procedure Use the GE-8433 puller bar and 2 bolts in the threaded holes of the front cover to remove it from the case. Special Tool GE-8433 Puller Bar Equivalent regional tools:Special Tools |
| 3 | Automatic Transmission Case Front Cover Seal
NOTE:
DISCARD the seal. |
| 4 | Drive Sprocket Thrust Washer- Front |
| 5 | Drive Sprocket |
| 6 | Drive Link |
| 7 | Drive Sprocket Thrust Washer- Rear |
| 8 | Automatic Transmission Front Support Cover Gasket
NOTE:
Remove and DISCARD the gasket. |