Single Use Fasteners and Components
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Turbine Shaft Retaining Ring
- Turbine Shaft Seal
- Turbine Shaft Seal
- Turbine Shaft Fluid Seal Ring [4x]
- Turbine Shaft Fluid Seal Ring [3x]
- 1-3-5-6-7 Clutch Piston Dam Retaining Ring
- 1-3-5-6-7 Clutch Piston Dam Seal
- 1-3-5-6-7 Clutch Piston Seal- Inner
- 1-3-5-6-7 Clutch Piston Seal- Outer
Special Tools
- DT-26941 Bushing and Bearing Remover
- DT-38734 Intermediate Spring Compressor Adapter
- DT-45124 Removal Bridge
Equivalent regional tools:Special Tools
Turbine Shaft Retaining Ring (1) - Remove and DISCARD
- Turbine Shaft (2) - Remove
- Turbine Shaft Seal (3) - Remove and DISCARD
- Turbine Shaft Fluid Seal Ring (4) - Remove and DISCARD [4x]
- Turbine Shaft Fluid Seal Ring (5) - Remove and DISCARD [3x]
- Turbine Shaft Seal (6) - Remove and DISCARD
Use the DT-38734 Intermediate Spring Compressor Adapter (1) and a press to remove the 1-3-5-6-7 Clutch Piston Dam Retaining Ring (2).
- 1-3-5-6-7 Clutch Piston Dam Retaining Ring (2) - Remove and DISCARD
- 1-3-5-6-7 Clutch Piston Dam (3) - Remove
- 1-3-5-6-7 Clutch Piston Return Spring (4) - Remove
1-3-5-6-7 Clutch Backing Plate Retaining Ring (1) - Remove
- 1-3-5-6-7 Clutch Backing Plate (2) - Remove
- 1-3-5-6-7 Clutch Plate - Friction (3) - Remove [4x]
- 1-3-5-6-7 Clutch Plate (4) - Remove [4x]
1-3-5-6-7 Clutch Piston (1) - Remove
- 1-3-5-6-7 Clutch Piston Dam Seal (2) - Remove and DISCARD
- 1-3-5-6-7 Clutch Piston Seal- Inner (3) - Remove and DISCARD
- 1-3-5-6-7 Clutch Piston Seal- Outer (4) - Remove and DISCARD
Use the DT-26941 Bushing and Bearing Remover (1) & DT-45124 Removal Bridge (2) to remove the 1-3-5-6-7 Clutch Thrust Bearing (3).
- 1-3-5-6-7 Clutch Thrust Bearing (3) - Remove
CAUTION:
Refer to Seal Reuse Caution .