LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior Trim And Paneling) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application
Rear Side Door Upper Track Garnish Molding Tether Clip
Roof Side Rail Garnish Molding Tether Clip
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Body Side Garnish Molding Bolt 2N.m (18 lb in)
Center Pillar Upper Garnish Molding Screw 2N.m (18 lb in)
Front Side Door Accessory Switch Mount Plate Bolt 1.9N.m (17 lb in)
Front Side Door Pull Handle Bolt 2.5N.m (22 lb in)
Front Side Door Trim Panel Bolt 1.9N.m (17 lb in)
Rear Door Inside Handle Bezel Bolt 1.9N.m (17 lb in)
Rear Side Door Inside Handle Bolt 3N.m (27 lb in)
Sunshade Fastener 1.9N.m (17 lb in)
Windshield Pillar Assist Handle Fastener 9N.m (80 lb in)