Front Side Door Front Garnish Molding Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Side Door Front Garnish Molding Procedure Use a plastic trim tool to disengage the retaining clip. Lift the front door front garnish molding up to disengage the tab on the garnish molding from the slot on the door trim panel. Ensure that the door weatherstrip is not trapped below the garnish molding once completely installed. Reposition the weatherstrip as necessary.

Callout

Component Name

Front Side Door Front Garnish Molding

Procedure

Use a plastic trim tool to disengage the retaining clip.
Lift the front door front garnish molding up to disengage the tab on the garnish molding from the slot on the door trim panel.
Ensure that the door weatherstrip is not trapped below the garnish molding once completely installed. Reposition the weatherstrip as necessary.